High-Accuracy Digital Contact SensorGT2 series

GT2-P12L

Stylus type General-purpose Sensor head (Low measuring force type)

SPECIFICATIONS

Select Language

Model

GT2-P12L*1

Detection system

Scale Shot System II, absolute (no tracking errors) type

Measuring range

12 mm

Resolution

0.5 μm

Indicated accuracy

2 µm (p-p)*2

Measuring force

Downward mounting

0.2 N*3

Side mounting

0.15 N*3

Upward mounting

0.1 N*3

Sampling cycle

4 ms

Mechanical response

4 Hz*2

Operation indicator light

2-colour LED (red, green)

Environmental resistance

Enclosure rating

-

Ambient temperature

-10 to +55 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s2 (IEC60068-2-27)

Materials

Main body

Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)

Dust boot

-

Contact

SUS304, SUS440C*4

Sensor head cable

Optional (connect to relay connector)

Weight

Approx. 35 g (not including cable)*5

*1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office.
*2 Value when the ambient temperature is 20°C.
*3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot.
This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.
No dust boots are used with the GT2-PA12K/PA12.
*4 Contacts are available as options sold separately.
*5 Including the relay connector.

For visitors who viewed this page

    Contact Sensor Tips

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Measurement Sensors