Two-colour Digital Display Pressure SensorAP-30 series

AP-32Z

Main Unit, Positive-pressure Type, 100 kPa, NPN

SPECIFICATIONS

Select Language

Model

AP-32Z

Type

Positive pressure , Zero shift [cannot be used within Japan according to the Measurement Act]

Output

NPN output

Rated pressure

0 to 14.50 PSI

Type of pressure

Gauge pressure

Fluid type

Air or non-corrosive gases

Display resolution

0.001 bar, 0.02 Psi,
0.1 kPa, 0.001 kgf / cm2

Display range

-15% to +110% of F.S.

Response time (chatterprevention function)

2.5/5/100/500 ms (selectable)

Display power

3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm )

I/O

Analogue output

Zero-shift input

No-voltage input (with contacts, without contacts), input time: 20 ms or more

Control output hysteresis

Variable (when hysteresis mode is selected), 0.5% of F.S. in standard mode

Rating

Power voltage

12 to 24 VDC ±10 % or less, Ripple (P-P) 10 % or less

Current consumption

50 mA (at 24 V) or less, 90 mA (at 12 V) or less

Environmental resistance

Pressure resistance

4.9 bar (490 kPa)

Ambient temperature

0 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,
Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable

Weight

Approx. 120 g

For visitors who viewed this page

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Process Controls / Process Sensors