|
|
 |
|
| Specifications |
|
|
Best in Class Performance with the Specifications to Prove it |
| For Full Details Download the PRODUCT CATALOGUE Using the SERVICE PULLDOWN Above. |
|
|
| AP-C40W/V40W Separate Amplifier/Thin Amplifier Type Pressure Sensor |
| Type |
Main unit |
| Model |
NPN |
AP-V41W/V42W/C40W |
| PNP |
AP-V41WP/V42WP/C40WP |
| Applicable sensor head |
AP-41M/41 |
AP-43 |
AP-44 |
| Response time |
1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) |
| Resolution |
Standard mode: 0.1 inchHg High-resolution/ Focus mode: 0.01 inchHg |
Standard mode: 0.01 kgf/cm High-resolution/ Focus mode: 0.02 Psi |
Standard mode: 0.1 inchHg High-resolution/ Focus mode: 0.01 inchHg |
| Hysteresis |
Variable (Standard: 0.5% of FS; high-resolution/focus mode: 0.1% of F.S.) |
| Control output |
NPN open collector 100 mA max. (at 40 V or below) (2) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) |
| Analog output (1) |
1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable) |
| Power supply |
12 to 24 VDC ±10% with ripple (p-p) of 10% max. |
| Ambient temperature |
0 to 50°C (32 to 122°F), No condensation |
| Relative humidity |
35 to 85%, No condensation |
| Vibration resistance |
10 to 55Hz, 1.5mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively |
| Material |
AP-V41W/V42W: Polycarbonate AP-C40W: Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate |
|
|
1. Only the AP-V41W (Main unit) and AP-V40W apply.
2. The maximum current is 20 mA if the AP-V42W as an expansion unit is installed. |
|
| AP-41M/41/43/44 Pressure Sensor Heads |
| Type |
Negative pressure |
Positive pressure |
Compound pressure |
| Model |
AP-41M |
AP-41 |
AP-43 |
AP-44 |
| Rated pressure range |
0 to -29.9 inchHg |
0 to 145.0 Psi |
29.9 to -29.9 inchHg |
| Proof pressure |
5.00bar (500kPa) |
15bar (1.5MPa) |
5.00bar (500kPa) |
| Detectable fluid |
Air or non-corrosive gases |
| Pressure type |
Gauge pressure |
| Temperature fluctuation |
±2% of F.S. max. |
| pipe/port diameter |
M5 (M3) male screw |
| Ambient temperature |
0 to 50°C (32 to 122°F), No condensation |
| Relative humidity |
35 to 85%, No condensation |
| Vibration resistance |
10 to 55Hz, 1.5mm 0.06" double amplitude in X, Y, and Z directions, 4 hours respectively |
| Shock resistance |
1,000 m/s² in X, Y, and Z directions 10 times respectively (60 times in total) |
| Material |
Housing:PBT, Screw:Stainless steel |
|
|
|
|
|
|
|
|
|
| Related Information Topics |
|
| Related Product Downloads |
|
 |
Pressure Sensor
|
|
| Digital Pressure Sensors |
AP-30 Series
|
|
 |
 |
 |
 |
 |
| Built-in Amplifier type |
AP-C30W Series
|
|
|
|
|
|
|
| Separate Amplifier type/Separate Thin Amplifier type |
AP-C40W/V40W Series
|
|
|
|
|
|
|
|
|
| Product catalogs and manuals include both sensor head and amplifier information. |
|
|
|
 |
 Price Info |
| Request AP-C40W/V40W Series price information. |
|
|
|
|
|
|
