CCD Laser Displacement SensorLK series

LK-500

Sensor Head, Small Spot

[Discontinued model]

This model has been discontinued.

Recommended Replaceable Products
To contact us:

SPECIFICATIONS

Select Language

Model

LK-500

Type

Sensor head

Measurement mode

High-precision mode,Long-range mode

Reference distance

350 mm (High-precision mode),500 mm (Long-range mode)

Measuring range

±100 mm (High-precision mode),±250 mm (Long-range mode)

Light source

Type

Red semiconductor laser

Wavelength

690 nm (visible light), JIS Class 3B*1

Output

15 mW maximum

Spot diameter (at standard distance)

Approx. 0.7 mm (high-precision mode), approx. 0.3 mm (long mode)

Linearity

±0.1% of F.S.

Repeatability

10 µm*2 (High-precision mode), 50 µm*2 (Long-range mode)

Analogue output

Output voltage

±10 V (10 µm/mV)*3 (High-precision mode), ±5 V (50 µm/mV)*3 (Long-range mode)

Impedance

100 Ω

Output current

4 to 20 mA (350 Ω maximum)*4*5

Alarm output

NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.

Sampling cycle

1,024 µs

Other functions

Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment

Temperature characteristics

0.02% of F.S./°C

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Maximum current consumption

400 mA max.

Environmental resistance

Enclosure rating

IP67

Ambient light

Incandescent or fl uorescent lamp: 10,000 lux max.

Ambient temperature

0 to +50 °C (No condensation)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Aluminium die-cast

Weight

Approx. 700 g (including cable)

*1 Contact KEYENCE for information on the type with a Class 2 laser.
*2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64.
Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board.
*3 When measurement is impossible, 12 V (31.2 mA) is output.
*4 LK-010: When measurements cannot be performed, this is 12 V (21 mA). LK-035/030, LK-085/080, and LK-500: When measurements cannot be performed, this is 12 V (31.2 mA).
*5 The ±5 V analog voltage output range (the ±

For visitors who viewed this page

    Measurement Library

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Measurement Sensors