Recent Searches
    Series ( results)
      Models ( results)
          1. Home
          2. Products
          3. Measurement Sensors
          4. Laser Displacement Sensors (1D)
          5. CCD Laser Displacement Sensor
          6. Models
          7. Sensor Head, Small Spot, Laser Class 2

          CCD Laser Displacement SensorLK series

          Sensor Head, Small Spot, Laser Class 2


          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:


          Select Language




          Sensor head Long-distance *1 Sensor head

          Measurement mode

          High-precision mode,Long-range mode

          Reference distance

          350 mm (High-precision mode),500 mm (Long-range mode)

          Measuring range

          ±100 mm (High-precision mode),±250 mm (Long-range mode)

          Light source


          Red semiconductor laser


          690 nm (visible light), Class 2


          0.95 mW maximum

          Spot diameter (at standard distance)

          Approx. 0.7 mm (high-precision mode), approx. 0.3 mm (long mode)


          ±0.1% of F.S.


          10 µm*2 (High-precision mode), 50 µm*2 (Long-range mode)

          Analogue output

          Output voltage

          ±10 V (10 µm/mV)*3 (High-precision mode), ±5 V (50 µm/mV)*3 (Long-range mode)


          100 Ω

          Output current

          4 to 20 mA (350 Ω maximum)*4

          Alarm output

          NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.

          Sampling cycle

          1,024 µs

          Other functions

          Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment

          Temperature characteristics

          0.02% of F.S./°C


          Power voltage

          24 VDC ±10 %, Ripple (P-P) 10 % or less

          Maximum current consumption

          400 mA max.

          Environmental resistance

          Enclosure rating


          Ambient light

          Incandescent or fl uorescent lamp: 10,000 lux max.

          Ambient temperature

          0 to +50 °C (No condensation)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions


          Aluminium die-cast


          Approx. 700 g (including cable)

          *1 The LK-503 can both be used in High-precision mode or Long-range mode.
          *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64.
          Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board.
          *3 When measurement is impossible, 12 V (31.2 mA) is output.
          *4 The ±5 V analog voltage output range (the ±10 V range on the LK-010) becomes the 4 to 20 mA analog current output.

          Measurement Library

          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE (UK) Ltd Avebury House, 219-225 Avebury Boulevard, Milton Keynes MK9 1AU, U.K.
          Phone: +44 (0) 1908-696-900
          Career Opportunities: KEYENCE Career Site

          Measurement Sensors