Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          High-speed 2D/3D Laser Profiler

          LJ-V7000 series

          Select Language

          Model

          LJ-V7001

          LJ-V7001P

          Number of connectable sensors

          Max. 2 units

          Display

          Minimum
          displayable unit

          0.1 µm, 0.00001 mm2, 0.01°

          Maximum display range

          ±9999,99mm, ±9999,99mm2

          Input terminal block

          Laser remote interlock input

          Non-voltage input*1

          Input
          terminal block

          Encoder input

          NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported

          Input terminal block

          Trigger input

          Non-voltage input*1

          Voltage input*4

          Timing 1,2 input

          Auto-zero 1,2 input

          Input
          terminal block

          Reset 1, 2 input

          Input terminal
          block

          Start measurement/stop input

          Start storage/stop input

          Clear memory input

          Laser OFF input

          Programme switch input

          Non-voltage input x 4 inputs*1

          Voltage input x 4 inputs*4

          Output terminal block

          Analogue voltage output

          ±10 V x 2 outputs, Output impedance: 100 Ω

          Output
          terminal block

          OUT comparator output

          NPN open collector output x 12 outputs*2
          (Can freely assign 16 OUTs x 3 stage judgement results)

          PNP open collector output x 12 outputs*5
          (Can freely assign 16 OUTs x 3 stage judgement results)

          Strobe output

          NPN open collector output*2

          PNP open collector output*5

          Disable trigger output

          Memory FULL output

          Ready output

          Output terminal block

          Error output

          NPN open collector output (N.C.)*2

          PNP open collector output (N.C.)*5

          PC interface

          Ethernet

          1000BASE-T/100BASE-TX*3

          USB

          USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)*3

          RS232C

          Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)

          Rating

          Power voltage

          24 VDC ±10 %, including Ripple (P-P)

          Current consumption

          1.3 A or less when connected to 1 head
          1.9 A or less when connected to 2 heads

          Environmental resistance

          Ambient temperature

          0 to +50 °C

          Relative humidity

          20 to 85 % RH (No condensation)

          Weight

          Approx. 1,500 g

          *1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current
          *2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V
          *3 Sample DLL and LabVIEW programs are available. Contact your local sales office for details.
          *4 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current
          *5 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V

          Model

          LJ-VM100

          Monitor output

          Analog RGB XGA (1024 × 768)
          Touch panel monitor (CA-MP120T), specialized connector included

          Rating

          Power voltage

          Supplied from the controller

          Power consumption

          2.5 W or less

          Environmental resistance

          Ambient temperature

          0 to +50 °C

          Relative humidity

          20 to 85 % RH (No condensation)

          Weight

          Approx. 400 g

          Model

          LJ-V7020K*1

          LJ-V7020*1

          LJ-V7060K

          LJ-V7060

          LJ-V7080

          LJ-V7200

          LJ-V7300

          Mounting conditions

          Specular reflection

          Diffuse reflection

          Specular reflection

          Diffuse reflection

          Reference distance

          24.2 mm

          20 mm

          54.6 mm

          60 mm

          80 mm

          200 mm

          300 mm

          Measurement range

          Z-axis (height)

          ±2.3 mm
          (F.S.=4.6 mm)

          ±2.6 mm
          (F.S.=5.2 mm)

          ±7.6 mm
          (F.S.=15.2 mm)

          ±8 mm
          (F.S.=16 mm)

          ±23 mm
          (F.S.=46 mm)

          ±48 mm
          (F.S.=96 mm)

          ±145 mm
          (F.S.=290 mm)

          X-axis (width)

          NEAR side

          6.5 mm

          8 mm

          13.5 mm

          25 mm

          51 mm

          110 mm

          Reference distance

          7 mm

          14 mm

          15 mm

          32 mm

          62 mm

          180 mm

          Far side

          7.5 mm

          8 mm

          39 mm

          73 mm

          240 mm

          Light source

          Type

          Blue semiconductor laser

          Wavelength

          405 nm (visible beam)

          Laser class

          Class 2M Laser Product*2
          (IEC60825-1, FDA(CDRH) Part 1040.10*3)

          Class 2 Laser Product
          (IEC60825-1, FDA(CDRH) Part 1040.10*3)

          Class 2M Laser Product*2
          (IEC60825-1, FDA(CDRH) Part 1040.10*3)

          Class 2 Laser Product
          (IEC60825-1, FDA(CDRH) Part 1040.10*3)

          Output

          10 mW

          4.8 mW

          10 mW

          4.8 mW

          Spot size (reference distance)

          Approx. 14 mm × 35 µm

          Approx. 21 mm × 45 µm

          Approx. 48 mm × 48 µm

          Approx. 90 mm × 85 µm

          Approx. 240 mm × 610 µm

          Repeatability

          Z-axis (height)

          0.2 µm*4*5

          0.4 µm*4*5

          0.5 µm*4*5

          1 µm*4*5

          5 µm*4*5

          X-axis (width)

          2.5 µm*4*6

          5 µm*4*6

          10 µm*4*6

          20 µm*4*6

          60 µm*4*6

          Linearity

          Z-axis (height)

          ±0.1% of F.S.*7

          ±0.05 to ±0.15% of F.S.*7*12

          Profile data interval

          X-axis (width)

          10 µm

          20 µm

          50 µm

          100 µm

          300 µm

          Sampling cycle (trigger interval)

          Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)*8

          Temperature characteristics

          0.01% of F.S./°C

          Environmental resistance

          Enclosure rating

          IP67 (IEC60529)*9

          Ambient light

          Incandescent lamp: 10,000 lux max.*10

          Ambient temperature

          0 to +45 °C*11

          Relative humidity

          20 to 85 % RH (No condensation)

          Vibration resistance

          10 to 57 Hz, Double amplitude 1.5 mm, 3 hours in each of the X, Y, and Z directions

          Shock resistance

          15 G/6 ms

          Material

          Aluminium

          Weight

          Approx. 410 g

          Approx. 450 g

          Approx. 400 g

          Approx. 550 g

          Approx. 1,000 g

          *1 The double polarisation function cannot be used.
          *2 Do not look into the beam directly using any optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars).
          Viewing the laser output with an optical instrument may pose an eye hazard.
          *3 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50.
          *4 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging.
          *5 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default.
          *6 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default.
          *7 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default.
          *8 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON.
          All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default.
          *9 This value is from a case in which the sensor head cable (CB-B*) or extension cable (CB-B*E) has been connected.
          *10 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper.
          *11 The sensor head must be mounted on a metal plate for use.
          *12 The linearity will differ depending on the measurement area.

          Measurement Library

          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors