Recent Searches
    Series ()
      Models ()
        Keywords

          Digital Fibre Optic SensorsFS-N series (FS-neo)

          FS-N15CN

          Fibre Amplifier, M8 Connector Type, NPN

          SPECIFICATIONS

          Select Language

          Model

          FS-N15CN

          Type

          1 output type

          Output

          NPN

          Input/Output configuration

          M8 connector *1

          Main unit/Expansion unit

          Main unit

          Control output

          1 output
          NPN open collector 24 V or less; maximum 100 mA or less, residual voltage 1 V or less

          External input

          1 input
          Input time 2 ms (ON)/20 ms (OFF) or more, when selecting External calibration 25 ms (ON/OFF) or more

          Response time

          50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)

          Multiple connections to Expansion units

          0 units (expansion not possible)

          Output toggle

          LIGHT-ON/DARK-ON (switch-selectable)

          Light source

          Red, 4-element LED (Wavelength: 630 nm)

          Timer function

          Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer

          Protection circuit

          Reverse polarity protection, Over-current protection, Surge absorber

          Number of interference prevention units

          0 units (connection not possible)

          Case dimensions

          H30.3mmxW9.8mmxL71.8mm

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current Consumption

          Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V) *2
          Econ on (ALL): 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V) *2
          Eco full: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

          Environmental resistance

          Enclosure rating

          IP66*3*4

          Ambient light

          Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less

          Ambient temperature

          -20 to +55 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Main unit: glass-reinforced PBT; Cover: Sulfonic resin

          Material

          Adapter

          Glass-reinforced PBT

          Weight

          Approx. 30 g

          *1 Use a cable of 30 m or less.
          *2 When the Power Mode is set to HIGH SPEED, 100 mW (4.0 mA) will be added.
          *3 About the enclosure rating when a small-diameter fibre unit (the diameter of the cable is ø1.3 or ø1.0) is used. IP66/IP65 cannot be satisfied when the type whose diameter is ø1.3 and terminal can be separated (FU-4F/ 66/91/93/43/63/63T etc.) is used. When any small-diameter fibre units except for the above are used, IP65 is applied.
          *4 In any of the following cases, the enclosure rating IP66/IP65 cannot be satisfied.
          When the Fibre Unit and KEYENCE's M8 connector cable are not connected (Recommended conditions to tighten up the M8 connector: Tighten it by hand first.Then retighten it as much as 1/16-1/8 of a rotation with pliers.)
          When the Fibre Unit and KEYENCE's M8 connector cable are not connected
          When the dust cover of the Sensor Amplifier is open
          When there is debris in the dust cover
          When the waterproof adapter A/B are not used at the time of installation of a small-diameter fibre unit.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

          Fibre Unit Finder

          • Fibre Unit Finder
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors