Recent Searches
    Series ()
      Models ()
        Keywords

          Manual-Calibration Fibreoptic SensorFS-V/T/M series (FS01)

          FS-T1G

          Fibre Amplifier, Cable Type, Main Unit, NPN

          SPECIFICATIONS

          Select Language

          Model

          FS-T1G

          Light source

          Green LED

          Response time

          250 µs

          Operation mode

          LIGHT-ON/DARK-ON (switch-selectable)

          Indicator lamp

          Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Orange LED

          Timer function

          ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

          External calibration input
          signal

          Non-voltage input (contact, solid state)

          Input

          Control output

          NPN: 100 mA (40 V) max.
          Residual voltage: 1 V max.*1

          Stability output

          NPN open-collector: 50 mA max. (40 VDC max.), Residual voltage:1 V max.

          Protection circuit

          Reversed polarity protection, Overcurrent protection, Surge absorber

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current consumption

          35 mA or less

          Environmental resistance

          Ambient light

          Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.

          Ambient temperature

          -10 to +55 °C (No freezing)*2

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Polycarbonate

          Accessories

          Fittings

          Weight

          Approx. 75 g

          *1 La salida de alarma de interrupción de conexión no está disponible en ES-M2 (P).
          *2 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

          Fibre Unit Finder

          • Fibre Unit Finder
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors