Recent Searches
    Series ()
      Models ()
        Keywords

          CMOS Multi-Function Analogue Laser SensorIL series

          IL-1550

          Amplifier unit, Panel mount type

          SPECIFICATIONS

          Select Language

          Model

          IL-1550

          Type

          Panel mount

          Main unit/Expansion unit

          Expansion unit

          Head compatibility

          Compatible

          Display

          Minimum
          displayable unit

          IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm

          Display range

          IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable),
          IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable)

          Display rate

          Approx. 10 times/sec.

          Analogue voltage output

          None

          Analogue current output

          Control input

          Bank switch input

          Non-voltage input*1

          Zero-shift input

          Stop emission input

          Timing input

          Reset input

          Control output

          Judgment output

          Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*2

          Alarm output

          Open collector output (NPN, PNP changeover possible/N.C.)*2

          Current

          Power voltage

          Supplied by main unit*3

          Power consumption

          2200 mW or less (at 30 V: 74 mA or less)

          Environmental resistance

          Pollution degree

          2

          Ambient temperature

          -10 to +50 °C (No condensation or freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Material

          Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC

          Weight

          Approx. 160 g (including attachments)

          *1 Assign an input of your choice to the 4 external input lines before using.
          *2 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit)
          The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit)
          *3 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors