Fully Operational with Expanded Resources Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
  1. Home
  2. Products
  3. Sensors
  4. Photoelectric Sensors
  5. Built-in amplifier photoelectric sensors
  6. Models
  7. Square retro-reflective Cable Type, NPN

Built-in amplifier photoelectric sensorsPZ series

Square retro-reflective Cable Type, NPN


[Discontinued model]

This model has been discontinued.

Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products
To contact us:


Select Language




Retro-reflective model, L model

Detecting distance

0.1 to 2.5 m (when reflector R-1 is used)

Light source

Infrared LED

Detectable object

Opaque material with an area of 30 mm2 or more


Sensitivity adjustment

1-turn trimmer (240°)

Response time

1 ms max. (2 ms in alternate frequency mode)

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: red LED, stable operation: green LED



Maximum NPN open-collector output: 100 mA or less (40 V or less)

Stability output

Maximum NPN open-collector output: 50 mA or less (40 V or less)

Protection circuit

Reversed polarity, overcurrent protection, surge absorber


Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

30 mA or less

Environmental resistance

Enclosure rating


Ambient light

Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less

Ambient temperature

-20 to +55 °C (No freezing)

Relative humidity

35 to 85 % RH

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Case material

Fibreglass reinforced plastic


Approx. 75 g (including 2-m cable)

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • Trade Shows and Exhibitions
  • eNews Subscribe