Recent Searches
    Series ()
      Models ()
        Keywords

          Vision SensorIV series

          IV-G10

          For IV-G, Sensor Amplifier, Main unit

          SPECIFICATIONS

          Select Language

          Model

          IV-G10

          Type

          Main unit

          Tools

          Type

          Shape Detection, Area*1, Colour Area*2, position adjustment

          Number

          Detection tools: 16 tools, position adjustment tool: 1 tool*3

          Switch settings (programs)

          32 programmes

          Image history

          Numbers

          When using a colour type head: 100 images*4, when using a monochrome type head: 300 images*5*6

          Condition

          NG only/All is selectable*6

          Analysis information

          OFF/Statistics/Histograms is switchable
          Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgement results list by tools
          Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs*7

          Other functions

          HDR, HighGain, Colour filters*2, Digital zoom (2x, 4x)*8, Brightness correction, Tilt correction, White balance*2, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor,
          Output test, Security settings, Simulator, Mutual interference prevention, Total judgement result output, Direct connection (2 units or more), Failing sensor list, Failure hold

          Indicators

          PWR/ERR, OUT, TRIG, STATUS, LINK/ACT

          Input

          Type

          Non-voltage input/voltage input is switchable
          For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
          For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)

          Inputs

          6 inputs (IN1 to IN6)

          Function

          IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions
          Assignable functions: Program switching, Clear error, External master image registration, Main unit/expansion unit simultaneous input

          Output

          Type

          Open collector output NPN/PNP is switchable, N.O./N.C. is switchable
          For open collector NPN output: Maximum rating 26.4 V 50 mA (20 mA when linked to an expansion unit [IV-G15]), remaining voltage 1.5 V or lower
          For open collector PNP output: Maximum rating 26.4 V 50 mA (20 mA when linked to an expansion unit [IV-G15]), remaining voltage 2 V or lower

          Outputs

          8 outputs (OUT1 to OUT8)

          Function

          Enable by assigning the optional functions
          Assignable functions: Total judgement result, RUN, BUSY, Error, Position adjustment result, Judgement result of each tool,
          Result of the logical operation of each tool, Main unit/expansion unit logical output

          Ethernet

          Standard

          100BASE-TX/10BASE-T*9

          Connector

          RJ-45 8pin connector*9

          Network function

          FTP client, EtherNet/IPTM, PROFINET

          Rating

          Power voltage

          24 VDC ±10 % (including ripple)

          Current consumption

          0.8 A or less. 1.5 A or less when also using an expansion unit (IV-G15). (The output load is excluded.)

          Environmental resistance

          Ambient temperature

          0 to +50 °C (No freezing)*10

          Relative humidity

          35 to 85 % RH (No condensation)

          Material

          Main unit case: Polycarbonate

          Weight

          Approx. 150 g

          *1 Monochrome type only
          *2 Colour type only
          *3 Tools can be installed by programmes.
          *4 When using the FTP client function: 70 pictures
          *5 When using the FTP client function: 210 pictures
          *6 Saves to the sensor amplifier's internal memory. The images saved to the sensor amplifier can be backed up to the USB memory device inserted into the intelligent monitor (IV-M30) or to the PC by the software for the IV/IV-G Series (IV-H1).
          *7 This can be displayed on the intelligent monitor (IV-M30) or by software for the IV/IV-G Series (IV-H1).
          *8 Possible with both the colour type and monochrome type
          *9 This is for connection with the intelligent monitor (IV-M30) or software for the IV/IV-G Series (IV-H1).
          *10 When attaching the sensor amplifier to a DIN rail, attach the sensor amplifier to a metal plate.

          • XG/CV系列 用户支持
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Vision / Auto ID