Specs High-speed, High-Accuracy Digital Displacement Inductive Sensor EX-V series

Sensor head

Model		EX-305V^*1	EX-110V^*1	EX-416V^*1	EX-422V^*1	EX-614V^*1
Image
Type		Sensor head
Amplifier unit		EX-V01(P)	EX-V02(P)	EX-V05(P)	EX-V10(P)	EX-V64(P)
Shape		ø5.4 x 18 mm Cylindrical	M10 x 18 mm Threaded	ø14.5 x 20 mm Cylindrical,threaded	ø22 x 35 mm Cylindrical,threaded	14 x 30 x 4.8 mm Thin profile
Measuring range		0 to 1 mm	0 to 2 mm	0 to 5 mm	0 to 10 mm	0 to 4 mm
Display range		-19999 to +19999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 µm		1 µm	2 µm	1 µm
Sampling rate		40000 samplings max./sec. ^*2
Display speed		20 times/sec.
Display power		7-segment 2-colour LED
Over-range alarm		±FFFF is displayed.
Control input		NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input, Synchronous input, External setting input)/PNP: Applied voltage; 10 to 30 V
Controloutput	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
Control output	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) PNP open-collector (HIGH, GO and LOW): 100 mA max. (30 V max.)
Controloutput	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms
Strobe output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.)/PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. (N.C.)
Analogue output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*3
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10%, Ripple (P-P): 10% max.
	Current consumption	240 mA max.
Environmental resistance	Ambient temperature	-10 to +60°C, No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight		Approx. 45 g (including 3 m cable)	Approx. 55 g (including 3 m cable)	Approx. 75 g (including 3 m cable)	Approx. 200 g (including 3 m cable)	Approx. 60 g (including 3 m cable)
^1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials. ^2 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^*3 When the distance between the sensor head and the target is within 50% of the measuring range.