Wire-saving AI Digital Pressure SensorAP-V40 series
This model has been discontinued.
Amplifier Unit, PNP
Applicable sensor head
AP-41M, AP-41, AP-43, AP-44, AP-48
4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s
Red LED x 2 (corresponding to control output 1 and 2)
12 V: 840 mW (70 mA) max., 24 V: 1,200 mW (50 mA) max.
AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa
Display temperature characteristic
±1 % of F.S. or less
Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable
Response time (Chattering prevention function)
1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)
1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)*1
Input time: 2 ms or more (or analog output selectable)
Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)*2
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
12 V: 600 mW (50 mA) max., 24 V: 960 mW (40 mA) max.
0 to +50 °C (No freezing)
35 to 85 % RH (No condensation)
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Mounting bracket, head connection connector
Approx. 80 g (with 2 m cable)
*1 Only the AP-V41AW (P) (Master) and AP-C40W (P) apply.