Fully Operational with Expanded Resources Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
  1. Home
  2. Products
  3. Sensors
  4. Photoelectric Sensors
  5. Amplifier Separate Type Photoelectric Sensor
  6. Models
  7. Amplifier Unit, Expansion Unit, NPN

Amplifier Separate Type Photoelectric SensorPS-T series

Amplifier Unit, Expansion Unit, NPN

PS-T2

SPECIFICATIONS

Select Language

Model

PS-T2

Type

1-line connection

Output

NPN

Response time

500 µs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED

Timer function

ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

External calibration input signal

Non-voltage input (contact, solid state)

Control output

NPN:100 mA max. (40 V max.) Residual voltage: 1 V max.

Stability output

NPN:50 mA max. (40 V max.) Residual voltage: 1 V max. *1

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Multiple connections to Expansion units

Up to 16 expansion units can be connected (a total of 17 units)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient temperature

-10 to +55 °C (No freezing)*2

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Body/Cover: Polycarbonate

Weight

Approx. 40 g (including 2 m cable)

*1 Power for the PS-T2 (P)/T0 is supplied through the PS-T1, FS-T1, FS-M1 or FS-R0.
*2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
When 3 to 10 units: -10 to +50 °C (14 to 122 °F)
When 11 to 16 units: -10 to +45 °C (14 to 113 °F)
When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors