High-Accuracy Digital Contact Sensor

GT2 series

Catalogues View Catalogue

Amplifier Unit, Large Display Amplifier GT2-100P

GT2-100P - Amplifier Unit, Large Display Amplifier

  • CE Marking
  • UL Recognition(c/us)




Mounting type

Panel mount/Screw mounting using optional
mounting bracket


PNP output

Main unit/Expansion unit


Power supply voltage

20 to 30 VDC, including 10 % ripple (P-P), Class 2

Power consumption


4,500 mW max. (30 V, 150 mA max.)

Power saving (Eco)

3,600 mW max. (30 V, 120 mA max.)*1

Display power

Measured value display

6 + 1/2-digit 7-segment LED (red)

Other displays

2-colour, 13-level bar LED display (red, green), indicators (red, green)

Display range

-199.999.9 to 199.999.9

Display resolution

0.1 μm

Sampling rate

1,000 times/sec.

Control input

reset/bank input

No-voltage input

Control output


PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less

Response time

hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s

Environmental resistance

Ambient temperature

-10 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 0.15 mm, 2 hours in each of the X, Y, and Z directions


Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET

Power supply / I/O cable

Power supply: Terminal block, I/O: 20-pin connector (MIL standard)


Approx. 380 g

*1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode.
*2 When 2 or more sensor heads are connected, 20 mA or less.

Other Models