Intuitive Vision System
CV-5000 series
Recommended Replaceable Products: Intuitive Vision System - CV-X series
Contact Us: +44(0)1908-696-900 +353-1-800-813-031 Enquiry form
Digital Image Sensor/Controller CV-5701
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | CV-5701 | |||
Type | Controller | |||
No. of pixels | When CV-H500C/H500M is connected • 5 megapixel mode: 2432 (H) × 2050 (V), Approx 4,990,000 pixels When CV-200C/S200C/H200C/200M/S200M/H200M is connected • 2 megapixel mode: 1600 (H) × 1200 (V), Approx 1,920,000 pixels • 1 megapixel mode: 1024 (H) × 960 (V), Approx 980,000 pixels When CV-H100C/H100M is connected • 1 megapixel mode: 1000 (H) × 1000 (V), Approx 1,000,000 pixels When CV-035C/S035C/H035C/035M/S035M/H035M is connected • 240,000 pixel mode: 512 (H) × 480 (V), Approx 240,000 pixels • 310,000 pixel mode: 640 (H) × 480 (V), Approx 310,000 pixels | |||
Camera input | • Two colour/monochrome | |||
Main processor for image processing | DSP (High-speed) | |||
No. of registered settings | SD cards 1 and 2 can each hold 1000 programs (depending on the size of the SD | |||
Number of screens that can be registered | Maximum 1000 screens for each program (depending on SD card size), | |||
Internal memory capacity | SD card slot x2 (SDHC compatible) | |||
Window | Measurement area | 128 locations per program | ||
Mask area | 4 locations per area | |||
Colour extraction function (valid only when a colour camera is connected) | Colour binary, colour shade, Gray, RGB average gray (Colours can be specified | |||
Measurement | Area measurement | The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up to 12 | ||
Position detection | Pattern search | • Multiple searches possible for both pattern area and search area. The shapes are | ||
V-search | • Up to 256 patterns can be searched simultaneously for both pattern area and | |||
ShapeTrax2 | • Multiple searches possible for both pattern area and search area. The | |||
Edge position | • Angles can be measured. The shapes are rectangle, rotated rectangle, | |||
Trend edge position | • Circle or straight line can be measured from the detection results | |||
Blob (Centre of gravity) | The shapes are rectangle, rotated rectangle, circle, oval, ring, arc or polygon (up | |||
Inspection mode | Edge position | |||
Edge pitch | ||||
Edge count | The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to | |||
Edge angle | Shape is rectangle. | |||
Pair edge | The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to | |||
Trend edge width | Shapes are rectangle, rotated rectangle, ring and arc | |||
Blob (characteristic quantities) | • Labels, center of gravity, main axis angle, area, feret diameter, perimeter, | |||
Stain detection | • Subtract stain detection by using subtract filter | |||
Trend edge flaw | • The shapes are rectangle, circle, oval, ring, arc, and polygon. | |||
Intensity inspection | The shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to | |||
Colour (only when a Colour camera is connected) | • RGB and HSB measurement supported | |||
Geometry | • Calculation result can be reflected | |||
OCR | • Character recognition for max. 2 lines of 20 characters per line | |||
Interface | Control input | External trigger input | 2 points | |
Control input | 18 inputs | |||
Control output | Universal output | 27 outputs NPN (including two FLASH outputs linked to external trigger.) | ||
Total comparator output | 1 output, NPN open collector, maximum 50 mA (30 V or less) | |||
Monitor output | SVGA 800x600 (24-bit colour 60 Hz) | |||
Run indicator | Power, Error LED display | |||
RS-232C | Numerical value output, image data (compressible) and control input/output | |||
Ethernet | Numerical value output, image data (compressible) and control input/output enabled. | |||
USB | Numerical value output, image data (compressible) and control input/output | |||
PLC link | Numerical value output and control input/output using the RS-232C port or | |||
CC-Link | By connecting the optional CC-Link unit CA-NCL10E, numerical value input/ | |||
EtherNet/IP™ | Numerical value input/output and control input/output enabled while using an | |||
Illumination control | By connecting the optional illumination expansion unit, LED illumination (12 V, 24 | |||
Continuous capture function | • 1 to 32-time multi-measurement (maximum, minimum and average values) | |||
Execution condition setting function | Can set whether to execute the results (OK/NG) for other measurement and | |||
Image | Processing area setting function | • The applicable 980,000 pixels (1024 (H) x 960 (V)) can | ||
Scan mode | Progressive/interlace selectable | |||
Capturing start/end line setting function | Desired capture start/end line can be set within the image capture range. | |||
Correction | Position adjustment | Batch, individual (maximum 128 settings), X, Y, ±180° rotation. | ||
Camera gain adjustment | Sensitivity adjustment, offset, and span adjustment | |||
White balance adjustment (valid only when a colour camera is connected) | Manual setting using white paper | |||
Image inversion function | Can generate mirror images | |||
Scaling function | X and Y calibration setting for each camera. Conversion from measurement | |||
Filter function | Count | The same type of filter can be used up to 9 times. 13 steps. | ||
Type | Expand, shrink, average, median, edge sharpening, edge extract X, edge extract | |||
Display language | Japanese/English/German/Italian/French/Traditional Chinese/Simplified Chinese | |||
Calculation | Numerical | No. of settings | 128 calculations/1 program | |
Arithmetic operation | +, -, x, ÷ | |||
Arithmetic function | Square, exponential, counting fractions as one, round-off fractions, maximum, minimum, average, average within range, | |||
Comparative operator | <, ==, Not | |||
Geometric calculation | Distance between 2 points, angle of line segment, circle radius, circle center, | |||
Coordinate conversion function. | Coordinate system conversion, rotating matrix | |||
Type conversion function | Coordinate constant conversion, constant coordinate conversion, | |||
Logical operator | AND, OR, NOT, XOR | |||
Sort function | Maximum value index output, minimum value index output | |||
System function | Number of measurement times, measurement time, year, month, day, time, minute, second | |||
Time axis operation function | Previous measurement result acquisition operator | |||
Command memory | 1000 command memories that can be rewritten from external devices | |||
Support | Statistics analysis | No. of data | Max. 20000 data (can be saved into an SD card in a batch) | |
Statistical items | Maximum, minimum, average value, deviation (3σ), total status OK/NG times | |||
Screen save (valid when monochrome | The following number ofimages can be saved inthe system's memory:• Maximum 1023 images (monochrome camerain 240,000 pixel mode)• Maximum 511 images (monochrome camera in310,000 pixel mode)• Maximum 255 images (monochrome camerain 1 megapixel mode)• Maximum 127 images (monochrome camerain 2 megapixel mode)• Maximum 50 images (monochrome camerain 5 megapixel mode)• Maximum 1020 images (colour camera in 240,000pixel mode)• Maximum 509 images (colour camera in310,000 pixel mode)• Maximum 252 images (colour camera in 1megapixel mode)• Maximum 124 images (colour camera in 2megapixel mode)• Maximum 47 images (colour camera in 5megapixel mode) (These are the maximumvalues with only onecamera connected, and[Condition] set to [AllImages].) | |||
Programming aid | Image Zoom | Between 4% and 1600% during setting or operation (6% and 2500% during full | ||
Edge derivative wave display | Edge waveform can be graphically displayed during setting or operation, and | |||
Profile display | Trend edge position and gap can be graphically displayed during setting or | |||
Stability display | Stain detection (stain level) is displayed during setting or operation. | |||
Cutout projection waveform display | OCR automatic cutout waveform graphics can be displayed during setting or | |||
Shift all windows | Selected windows from an identical camera or an identical registered image can | |||
Flaw level waveform | The flaw level waveform of the trend edge tool can be displayed as a graphic in | |||
Display template | No. of display templates | 10 templates/1 program (within which 4 templates are specified values), | ||
No. of screens that can be displayed simultaneously | Max. 5 screens can be displayed at the same time | |||
Hold image | Up to the past three images (NG images) can be displayed as hold images. | |||
Screen customisation | No. of customised screens | 10 screens/1 program | ||
Custom item | Character string: Measurement value (decimal point can be specified), result, | |||
Measurement result interlink | • Display colour can be changed according to the result for figures and custom | |||
Operation rewrite function | • Upper/lower tolerance or command memory can be rewritten during operation. | |||
Emulation function | Built-in emulation function that can create new program data and save data on | |||
Program file update function | The program data used on the CV-3001 Series or CV-5001FE can be converted | |||
Custom menu function | Shortcut menu to a desired program screen can be created (20 menus/program). | |||
Memory card save function (SD2 slot only) | • Measurement value, judgment result, NG count, measurement image | |||
Others | Screen capture function, password function, re-test function, file management | |||
Rating | Power voltage | 24 VDC ±10 % | ||
Current consumption | 2.4 A (2 cameras at maximum load)/3.2 A (4 cameras at maximum load) | |||
Environmental resistance | Ambient temperature | With two cameras connected: 0 to +50 °C (0 to +45 °C with min. 1 megapixel camera connected) | ||
Relative humidity | 35 to 85 % RH (No condensation) | |||
Weight | Approx. 1,250 g | |||
*1 Some models also are compatible with the RS-232C, Ethernet ports in the system. |