Fully Operational with Expanded Resources Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
  1. Home
  2. Products
  3. Measurement Sensors
  4. Laser Profiler
  5. 2D/3D Laser Profiler
  6. Models
  7. 2D/3D controller

2D/3D Laser ProfilerLJ-X8000 series

2D/3D controller

LJ-X8000

SPECIFICATIONS

Select Language

Model

LJ-X8000

Head input

Up to 2 head units
Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.

Sampling cycle (trigger interval)

[2D mode] Maximum speed of 1 kHz (1 ms) *1
[3D mode] When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) *2
When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) *3
(Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) *4

Number of registered inspection settings

Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible

Master profile / number of reference images

[2D mode] Maximum 200 per setting per head (depends on SD card capacity)
[3D mode] Maximum 400 per setting (depends on SD card capacity)

Memory card

• SD card slot × 2
• Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB)
*In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E

Number of tools

[2D mode] 100/setting (of those, 20 are for misalignment correction)
[3D mode] Maximum of 100/setting

Interface

Control input

20 points (input terminal block: 5 points, parallel I/O: 15 points)

Control output

28 points (output terminal block: 6 points, parallel I/O: 22 points)
• Photo MOSFET*5

RS-232C

• Value output and control I/O (exclusive use with PLC link using an RS-232C port)
• Supports baud rates up to 230,400 bps

PLC link

• Value output using Ethernet port or RS-232C port, and control I/O
(Exclusive use with Ethernet/IPTM. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)

Ethernet

• Value output and control I/O
• In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programmes via KEYENCE PC application software
• Supports FTP client and FTP server functions
• Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported)
• Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T

USB

• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programmes via KEYENCE PC application software
• Dedicated USB 2.0

EtherNet/IPTM

• Value I/O and control I/O using Ethernet port (exclusive use with PLC link)
• Supports cyclic communication (max. 1436 bytes) and message communication
• Maximum Connections: 32
• Conforms to Version.CT15 conformance test

PROFINET

• Value input and control input/output using Ethernet port (when this is in use, PLC-Link and EtherNet/IPTM cannot be used)
• Supports cyclic communication (max. 1408 bytes)
• Supports non-cyclic communication (record data)
• Conforms to Conformance Class A

Mouse

Various menus can be controlled via the dedicated mouse (included with the controller)

SNTP

Automatic correction of date and time for this unit is possible by connecting to an SNTP server

USB HDD

By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output

Monitor output

Analogue RGB output, XGA 1024 × 768 (24-bit colour, 60 Hz)

Encoder input

1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)

Response frequency

RS-422

Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz

Open collector (OC)

Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz

Laser ON input

Non-voltage input (Shorted with short pin when shipped from factory)

Cooling fan

Provided

Minimum display unit

[2D mode] 0.1 µm, 0.01°, 0.00001 mm2
[3D mode] 0.1 µm, 0.001°, 0.0001 mm2, 0.00001 mm3

Language

Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean and German

Ratings

Power voltage

24 V DC ±10%

Maximum current consumption

3.3 A

Environmental resistance

Ambient temperature

0 to +45°C (DIN rail mounting) / 0 to +40°C (base surface mounting)

Relative humidity

35 to 85% RH (no condensation)

Weight

Approx. 2500 g

*1 For LJ-X8080 and LJ-X8200 connection, when binning (Z) is ON, or when the measurement range (Z) is set to 1/2. LJ-X8900 when the measurement range (Z) is set to 1/2.
*2 When the measurement range is narrowed in accordance with the binning settings.
*3 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values.
*4 When binning and parallel imaging are both ON. All other settings are default values.
*5 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Measurement Library

  • Trade Shows and Exhibitions
  • eNews Subscribe

Measurement Sensors