Recent Searches
    Series ( results)
      Models ( results)
          Fully Operational with Expanded Resources
          Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
          1. Home
          2. Products
          3. Sensors
          4. Photoelectric Sensors
          5. Amplifier Separate Type Photoelectric Sensor
          6. Models
          7. Amplifier Unit, Main Unit, PNP

          Amplifier Separate Type Photoelectric SensorPS-T series

          Amplifier Unit, Main Unit, PNP



          Select Language




          Main unit



          Response time

          500 µs

          Operation mode

          LIGHT-ON/DARK-ON (switch-selectable)

          Indicator lamp

          Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED

          Timer function

          ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

          External calibration input signal

          Non-voltage input (contact, solid state)

          Control output

          PNP:100 mA max. (30 V max.) Residual voltage: 1 V max.

          Stability output

          PNP:50 mA max. (30 V max.) Residual voltage: 1 V max. *1

          Protection circuit

          Reverse polarity protection, Over-current protection, Surge absorber

          Multiple connections to Expansion units

          Up to 16 expansion units can be connected (a total of 17 units)


          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current consumption

          35 mA or less

          Environmental resistance

          Ambient temperature

          -10 to +55 °C (No freezing)*2

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Body/Cover: Polycarbonate


          Approx. 75 g (including 2 m cable)

          *1 Stability output is only provided by the PS-T1 (P). Stability output for the PS-T2 (P)/T0 is sent from the PS-T1, FS-T1, FS-M1 or FS-R0.
          *2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
          When 3 to 10 units: -10 to +50 °C (14 to 122 °F)
          When 11 to 16 units: -10 to +45 °C (14 to 113 °F)
          When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE (UK) Ltd Avebury House, 219-225 Avebury Boulevard, Milton Keynes MK9 1AU, U.K.
          Phone: +44 (0) 1908-696-900
          Career Opportunities: KEYENCE Career Site