Automatically set up inspection by teaching at least 30 good parts.
Presence / Absence inspection counting black or white pixels by setting a binary threshold.
Check for correct colours using RGB (Red, Green, Blue) or HSB (Hue, Saturation, Brightness).
Presence / Absence inspection counting pixels by choosing which colours or shades are white or black.
Specify a pattern to detect presence or use to adjust the location of other required tools on a moving part.
Specify a pattern (outline) to detect presence or use to adjust the location of other required tools on a moving part.
Stable inspection used for finding defects, stains, or scratches or for detecting presence and counting.
Detect/count clusters of pixels that are lighter or darker than the average background.
Count, sort, or find the locations of multiple Items.
How an edge is detected and the settings common to all edge based tools.
Find the location of an edge for position reference or for use in a measurement calculation.
Find an angle by locating a radial edge along a curved surface using a ring or arc region.
Find an angle detecting an edge on two separate surfaces.
Detect two edges within the tool and determine the distance between them.
Measure the centre pitch or gap pitch across a set of edges.
Locate positions along the profile of surfaces in the Trend Edge tools and their common settings.
Profile a surface along a circle, arc, or ring to detect the min/max position or to specify a location.
Measure the width along an entire part or find the diameter of the part along the entire circumference.
Find defects along the edge of a line, circle or oval,and complex shapes and free curves.
Detect 1 and 2 dimensional codes with the option to output the read text and perform judgements with the built-in calendar.
Extract character information in the inspection region and recognise the character string.
Dimensional measurement by simply choosing points, lines, or shapes.
Find average or range greyscale values to determine presence or to determine a reference for lighting intensity.
Adjust tool inspection regions to account for changing part location.